GN Tubular Centrifuge Model 142G for Vietnam herbal solid – liquid separation Project

1.Project Introduction

1.1 Makeup of Original Material:Solid in extraction liquid

1.2Solid Particle Size Distribution:1-50 micromet

1.3 Final user Required Hourly max Capacity:1.5m3/h

1.4 Liquid Composition:No explosion, liquid is water and ethanol

1.5 Customer required electric system specification:220V/380V

1.6 Site Location:No. 37 DC7 street, Son kyward, Tan Phu Dist, HCMC Viet Nam

1.7 Final user name: GOLD SEAL MACHINERY CO.LTD

2.GN Tubular Centrifuge model GNGQ142G introduction

2.1 High Speed Tubular Centrifuge is a kind of fine separation equipment, which is especially suitable for the solid-liquid separation of suspensions with thin concentration, fine particles and small solid-liquid weight difference, or liquid-liquid-solid separation. It is necessary equipment for Industries of pharmaceutical, food, chemical, and biological products, fermentation broth, beverages, blood products, etc.

High Speed Tubular Centrifuges is artificial slag removal equipment, and the processing capacity is limited, so it is generally used for working conditions with low solid content and relatively small processing capacity.(GNGQ) Clarification Type Tubular Centrifuge

2.2 The centrifuge rotates at a high speed to reach a suitable working speed (the speed can be adjusted by the electric control panel), and the feeding inlet is continuously fed from the bottom, and a certain feeding pressure (greater than 0.05Mpa) is required.

The specific gravity of liquid phase in the feeding inlet is lighter, and it gradually spirals upward from bottom to top to continuously discharge from the clear liquid outlet at the upper part of the rotor.

2.3. The specific gravity of solid phase is relatively heavier, and it settles inside the rotor. After the solid is collected and full in the drum, the machine stops, and the rotor is manually removed for slag cleaning.

2.4. After the slag removal is completed, the rotor needs to be installed and reset, and then the next separation process begins.

This process can achieve solid-liquid separation.

Leave a Reply

Your email address will not be published. Required fields are marked *