Solids Control

GN Solids Control is a world famous company and brand in the solids control and waste management industry. Now its business range spanning from shale shakers, mud cleaners, decanter centrifuge, cutting dryer, vacuum degasser and so on. GN could be your one stop shop in the solids control and drilling waste management area. Its product application covers from oil and gas drilling, HDD and CBM drilling, bored pile and TBM drilling.

Today I will introduce two more naming rules to you, mud gas separator and screw conveyor. As these two products are widely used in the oil and gas drilling system, there are more and more customers showing their interest in them. So understanding the naming rules is very important and could help you select the products effectively and efficiently. Let’s start with the mud gas separator: GNZYQ1000A,GN means the company name in short. ZYQ means thename of mud gas separator in Chinese in short. 1000 means inner diameter of the mud gas separator is 1000 mm.A means this product is the first generation, and in future, GN will make more upgrades and improvements for the mud gas separator, there will be B, C etc. and more versions coming out. The mud gas separator is also called “poor boy degasser” which means it’s more economic than the vacuum degasser, but it’s just working under the mechanical crashing power to separate the cut gas from the mud without the vacuum pump.

mud-gas-separator30301-mud-gas-separator

Next let’s go to the screw conveyor: GNSC14A-24,GN means the company name in short, SC means the product name screw conveyor in short.14means the diameter is 14 inch. A means it is the first generation. 24 means the length of the screw conveyor is 24 feet. Screw conveyor is widely used in the drilling wastemanagement system to transfer the cuttings for final disposal.

That’s the basic introduction of the naming rules formud gas separator and screw conveyor. Hopefully it will be useful to you.We will try our best to assist your business to be successful. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com

GN solid control is the most the most cutting-edge technology, solid control and drilling waste management equipment manufacturer in China, which produces the mud centrifuge has been the largest oil giant enterprises of domestic and international several full approval. In the just-concluded 2016 CIPPE oil show, crown can solids control the display of the centrifuge series, series of mm small convertible centrifuge from 220 to 550 mm of big drum centrifuge, lined up at the scene of the exhibition, has made a lot of audience attention and end users.

Especially GNLW36 centrifuge model, both in the appearance of the old version and the new design was shown in the CIPPE 2016 booths, so what is the difference between GNLW363 decanter centrifuge is a new generation?The following simple statements.
1, the first generation of GNLW363, originally designed for 360 mm horizontal spiral sedimentation centrifuge, one will have two motor is a main auxiliary, respectively installed on both ends of the centrifuge.Though, is the highest level of materials, the design concept of the centrifuge is basically the same with other domestic counterparts of the old.
2, the second generation GNLW363B, more international, with the crown to solid control has been the product sales in many countries and regions of the world, as well as the champions league to the product design is becoming more and more internationalized, GNLW363B horizontal screw centrifuge before the two motor position has a into one end is at each end of the two, mainly is to increase the operator have more space and centrifuges operating characteristics of easy to maintain, stable operation.

waste-oil-recovery
3, the third generation GNLW363C sedimentation centrifuge, in addition to the basic drilling mud solid control can also be used for oilfield waste pulp processing, it is similar to GNLW363B, two motor on one side.But on the other details GNLW363C also has a better update on structure, structure, based on the B version upgrade C version of the centrifuge and been used in many fields.Such as sludge separation, flocculation and dewatering unit, waste pulp processing, etc., with the user feedback, after upgrade C version of the centrifuge in use process compared to B version, processing capacity increased by 50%, continuity of operations, rugged conditions objection to adapt.
4, the fourth generation of GNLW363D, the inside of the design and GNLW363C are similar, but the outlook is completely different, because the structure is higher than C version is more compact, the stability, its total weight is reduced by 30%, is advantageous for the urgent needs air

Drilling mud service contractors around the world are all use the rectangular drilling fluid circulating tank because the installation and migration performance of the system works very well. Meanwhile, no matter how good the mud agitator perform in ideal situation, the drilling fluid tank all have corners that mud agitator’s propellers cannot reach and stir. In order to resolve this issue, install the mud gun in the top of the tank to agitate the far corner of the mud tank.

Mud Gun

GN Solids America LLC’s GNNJQ series Mud gun serve as supportive machinery to the mud agitator.  It comes with nozzle that either made fixed angle or 360 degree ration angles the positive spray-effect distance of mug gun is approx. 3 meters long.   The gun size is related with drilling fluid density, viscosity and nozzle spray speed.  Mud gun is installed the top of mud tank can be need adjusted as need at any time. A mud gun is connected to a motor-pump to stir the drilling mud and prevent the solids from sinking on the bottom of the mud tank. The mud is mixed by being suck- withdraw into a pipe by a powerful pump and inject  back into the mud tank by being pressured push through the nozzle of the mud gun. The process is similar to how jets spray in the dish washer.

 

Drilling mud is a wet mud like substance resembles like thick clay and is used to keep the drill head in controlled-temperature and carry the remnants of drilling cutting to the surface in water and oil or gas drilling operations. The mud is recycled and reused by passing it through several steps of filter and cleaning by screens of the shale shaker or mud cleaner and decanter centrifuge as it is circulated into the mud tanks then back to the drill well on the drilling rig. In order to keep the mud as liquid-liked as possible, a mud gun and mud agitator is used to keep the tank agitated and mixed.  Drilling mud is made by mixing water or oil with a clay-like substance and also other chemicals.

 

Mud tanks are used very often on drilling site to store the drilling fluids and to be used as the base to locate the drilling fluids recycling equipment like shale shaker and decanter centrifuge. GN solids control is a manufacturer specially for drilling fluids recycling equipment, thus the mud tank is one of GN’s main products.

So long you want to reserve the drilling fluids on site, and then you will need mud tanks. The size and structure of the mud tanks would be various according to the drilling depth and drilling type. Some drillers have their own mud mixing system with the rig, thus they can do the mud recycling job onsite, which is very convenient and cost saving. Some other drillers will collect the used drilling fluids and send to a mud plant for separation, after large size cuttings removed, the drilling fluids will be brought back to the rig for reuse. Trailer mounted tank is an ideal choice for these drillers as the drilling fluids could be collected in the tank and very fast to deliver to the mud plant. GN is not good at making such type mud tanks.

While most of GN’s mud tank are skid mounted that could be lifted and dragged on site by crane or truck. This type mud tank is better to be put on site permanently with the rig, whenever the rig would be moved; the mud tanks would be moved.

drilling mud system

For some drilling site with limited space and the driller have the requirements for move the mud tank from one site to another frequently, GN proposed the mud tanks with hydraulic jack-up leg system. At both ends of the mud tank, the jack-up legs are installed to rise the whole tanks and even the equipment on the tank. The legs can open that the flat bed trailer can back in, and then the legs will fall down until the tank be put on the trailer smoothly. At this time, the mud tanks could be transported to other sites.

GN has made mud tank with jack-up legs for many customers coming from oil gas drilling and no dig drilling industry. This is also a very good option for fast moving mud tank design.

Russian federation is a very important market connected with GN. GN owns a superb marketing share in The ussr market. With the establishment involving GN Solids Russia, advantages and more cooperation between GN group and Russia oilfield waste management companies.

Just lately, a complete drilling waste management system has been dispatchedfor a new Russia client. The system has been put in a 40ft container for fast portable and also for keep increased temperatures the cold weather of Russian federation. It is not the first time for GN Solids Control company provided containerized system to Russian federation market. The system comes with following equipment:

1) Containerized drilling cuttings vertical dryer system consist of one set of GNCD930 up and down cuttings dryer, catch tank, flushing pump and mud transfer pump.
2) Cuttings assortment box for storage associated with drilling cuttings from the top to bottom cuttings dryer.
3) Feeding twist conveyor for transfer drilling cuttings from the oil drilling rig and sent to top to bottom cuttings dryer.
4) Drilling cuttings transfer pump for exchange drilling cuttings with more wetness.
5) Variable speed decanter centrifuge with feed pump intended for polishing the drilling mud recovered from the cuttings dryer.
160520VerticalDryer
This module drilling waste  management components is easy to get transportation. And it is flexible for your operators to lay out inside the drilling rig site many different shape of the site.

You can speak to GN Solids Control Russian federation office to learn more about this low heat drilling waste management system.

Advantage of GN Drilling waste management system:
1) One end solutions from the same supplier: GN Solids Control Tiongkok.
2) High Quality products: the 1st API certified waste management equipment from China.
3) Reliable expert services, GN not only supply devices, but also GN provide the client training services and guarantee for 14 months immediately after shipment.
4) Cost effective treatments. Worldwide market share allows GN Solids Control to provide large volume of equipment, and helps you to save cost for making each sole equipment and in a result to help giving cost effective solutions to the particular clients.