GN Solids Control is one of the largest solids control and waste management companies specializing in the production of related equipment such as shale shakers, desanders, desilters, mud cleaners, vacuum degassers, mud gas separators, sedimentation centrifuges Machine, agitator, centrifugal pump, cutting dryer, screw pump, shear pump, mud gun, etc. After 10 years of development, GN has promoted its products to more than 60 countries and now has two overseas subsidiaries in the US and Russia.
The oil sludge treatment system recently produced by GN Soilds Control is used in Kazakhstan for the convenience of the overall transportation of the oily sludge treatment system. The on-site installation and the formal operation have been highly recognized by the customers in Kazakhstan, and have been debugged by the after-sales service personnel of GN Soilds Control. In the case of feedback on the use of field equipment, the effect of the oily sludge treatment system has exceeded the original design expectations. Kazakhstan customers are highly appreciative.
The high oil content of the on-site waste of Kazakhstan customers cannot be directly used or effluxed, and it is piled up to be air-dried or buried underground. It not only pollutes the environment, but also causes a lot of waste of resources. The local environmental protection department lists oily sludge as dangerous solid waste. The company’s oily sludge treatment system not only improves the environment, but also recovers crude oil and achieves considerable economic benefits. The oily sludge treatment system produced by GN Soilds Control mainly consists of sludge vacuum pump, tank body, dosing system, heating mixing tank, buffer oil water separation tank, vibrating screen, horizontal screw centrifuge, three-phase disc machine, screw pump, PE. The tank, the receiving box and the like, the oil sludge first enters the heating and stirring tank and simultaneously adds the flocculating agent, and is separated by the vibrating and sieving, the horizontal screw centrifuge is solid-liquid separation, and the three-phase disc machine separates the oil, water and mud. The solid phase oil content after treatment is controlled at ≤ 2% to meet customer’s processing requirements.
Welcome to www.gnsolidsamerica.com and send your questions to USA@gnsolidscontrol.com