Plain square and rectangular weaves are often referred to by the number of wires in each direction per linear inch for shale shaker screen. Use of a single number for describing screens implies a square mesh. For example “20mesh” usually describes a screen having 20 openings per inch in either direction along the screen grid.
GN Solids offer shaker screen as mentioned above for matching different brand like Derrick,Brandt,NOV,etc And a complete line solids control equipments.
Drilling waste management is a new industry to treat drilling cuttings to make it dry enough for delivery or final disposal., It’s main spec:
1) Bowl Diameter: 360mm
2) Bowl Length: 1270mm
3) Max Speed: 3200RPM
GN offer other size decanter centrifuge also like GNLW452G, GNLW363VFD,etc
Desilster cleaner is the third phase recycling after shale shakser and desander to separate silt above 20 microns.Main spec of GN desilter:
1) Shaker installed for dry performance
3) PU material
4) 4" size
5) Ball valve and clamp connect
GN Solids Control offer a complete line of No Dig drilling mud equipment, pls visit GN web for more info.
No Dig 500GPM mud tank system need very compact design to allow small footprint. It’s main spec as bellow:
1) 500GPM mud flow
2) 20ft container size mud tank
3) 1 set GN shale shaker
4) Jet mud mixier installed
Drilling cuttings re-injection (CRI) is an in situ method for the disposal of drilling cuttings and other drilling wastes into a sub犀利士
-surface stratum.
Drilling cuttings are slurriified with waster and groud down to a pre-determined partical size. The partical size is achieved by passing through a shaker screen. Slurry of the correct particle size and physical properties is injected via a pump, which is typically of a triplex design, into the well head at a given pressure and down into the pre-determined sub-surface injection zone. Over size particals from the shale shaker are re-circulated for further grinding.
