HDD & CBM mud system requirement is getting more and more because of environment limit. A mud mixing system is part of mud system to mixing chemicals for fresh mud
CBM mud mixing system will be more strict on electricals on explosion proof motors and electrical control panels.
Many clients are not so clear on there requirement for shale shaker. They may ask: Do I need a shale shaker for my rotary drilling?
Normally a shaker with 200 mesh screen can separate 75 micron drilling cuttings. If you mud solids particals is larger than 75 microns, a shale shaker will help you on better performance. If you mud solids cparticals are finer than 75 microns, you may consider to running a desilter directly
Pls contact GN Solids Control for more
When supplier offer work over drilling rig mud system proposals, they may ignore a very important spec ,the mud flow inlet to shale shaker.
GN Mud Recycling system for work over rig
Normally customer will raise rig a bit like 2300mm height from ground to shaker buffer box inlet. They may need a lower mud tank in this case
Pls contact us for inqury
The Mud Flow from work over Drilling rig always very low like 2.3m or 2m. In this case, they will need shale shaker inlet to be lower like 1.8m. How to make it workable as mud tank aways 1.6-2.4m high?
1) Lower mud tank. But you can’t lower it too much becasue their will be pump installed on tank skid
2) Lower shaker inlet center. Cut shaker deck back to be lower will be helpful
GN has sold a lot of work over rig shakers and knows how to meet clients requirement. Pls contact us freely
Mud guns are meant to provided supplemental or primary mixing in mud tanks depending on the number being used and the pit size. They are best used in tank corners to keep solids from settling and a mud agitator is placed in tank center.
The mud gun in mud tank is also used for transfer mud from compartment to compartment,like for trip tank compartment.
Please visit GN web for more
