mud tank

GN solids control Design and manufacture of container of combustible gas oilfield operations in the electronic déflagration system is the refinery along with gas gathering and switching exhaust and vent typically the gas processing plant, having fields of electronic combustion system can vent inflammable harmful gas ignited lose in order to eliminate its difficulties for environment and safety, is often a safe, environmental protection products. Besides used in refinery and also gas stations, oil field electric ignition device with mud gas separator, is now traditionally used in oil drilling executive.
Oil field the superiority regarding electronic ignition system
Digital ignition oil fields “artificial lighting” to “automatic operation”, reflect the humanistic thoughts and environmental demands. Making it necessary to use electronic combustion device, drilling, testing, development process, the release is often the truth. Over the past few decades, Flare feu are manual operation, persons close to flare points, can burn, burns easily, high risk; As well, the artificial operation timeframe is longer, the accuracy and reliability is not high, easy to produce toxic gas emissions for the atmosphere in great volumes, cause different degree of atmosphere pollution.
GN SOLIDS CONTROL Production of electronic feu device let the “shortcomings” stopped to exist. It can be currently of relief, timely, exact location setting off export spewed toxic flammable gas movement line, eliminating the damage connected with gas pollution to the atmosphere and human and pet.

GN power flare ignitor
Electronic ignition device besides used in refinery and filling stations, the device with mud propane separator, is now widely used inside petroleum drilling engineering, is actually a mature product, in home and sichuan oil and gas discipline in xinjiang, in spots like Iran, Egypt, venezuela abroad are using the product.
Electric ignition device is mainly made from DN200 (or 6) gasoline burner (torch), GDH : type 2 electronic igniter, firing equipment (gas tank, hose, etc . ), mud gas separator (matching) whenever used in drilling engineering, and so on This product adopts high performance electronic digital ignition circuit, its principal parts adopt imported ingredients and other parts and cables and wires with domestic high quality goods, stable performance, reliable perform.
Procedures:
Install the butano gas pipeline to safe practices of burner (torch) atmosphere inlet.
Pick up and start the actual electronic igniter current transformation and voltage amplification routine.
Open the gas tank, operating electronic igniter light source flash tube ignition (level), or directly open the particular emptying the firing on the gas valve, lit fireplace with electronic igniter pipe ignition (level 1).
Wide open the gas vent gateway cut, lit by the using up fire tube will mélodie (secondary ignition).
Close the actual gas tank, put out open fire tube, let the combustible in-take gas combustion.

GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

 

Mud agitator is widely used in mud cleaning systems. It is utilized in the mud tank as well as on the vessel to avoid the actual particles from settling straight down. Mud agitator is composed of some sort of motor, a gearbox, the particular shaft and impellers. This can be a very small equipment for drilling field.
Normally, a drilling rig mud tank system should be equipment with a significant no . of agitators. The higher quality , of the tank sides, a lot more quality of the mud agitators.
Many clients do not how to choose the best mud agitators modes and know the different mud agitators from different brand and various design. The main difference is that, typically the gearbox type is different. You will find mainly 2 type of items motor for mud agitators: helical bevel type items motor and Worm and kit type.
The helical bevel type gear motoriswith 2-stage or 3-stage transmission period.
It is with foot-mounted, flange-mounted Mounting mode, short flange-mounted model, torque arm-mounted type.

Mud Agitator
Furthermore, the Output shaft ofthe helical bevel type accessory motoris solid shaft, ineffective shaft (with key, having shrink disc and with involute spline).
Features of Helical-Bevel Products box and motor regarding mud agitator
It is Large modular design of the helical bevel type gear electric motor.
The helical bevel variety gear motoris with High reloading support. It is with a secure transmitting and a low noise degree.
The helical bevel variety gear motor is with good performance sealing. It can be used for an array of industry application.
The helical bevel type gear generator is with a High efficiency. It will save power during operating.
The helical bevel style gear motoris low repair and it can reduce the cost of users.
Worm and gearmotor device agitators is one of the most popular kind mud agitator. The gear package is worm and gear kind for easy operation repairs and maintanance. The worm and gear package is utilize the gear in order to transmit the motor acceleration to the request RPM. It might be widely used.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

GN keeps research and develop the best technology to manufacture top quality shaker screens for our clients,

Welcome come to know more info from our sales team.

Drilling mud service contractors around the world are all use the rectangular drilling fluid circulating tank because the installation and migration performance of the system works very well. Meanwhile, no matter how good the mud agitator perform in ideal situation, the drilling fluid tank all have corners that mud agitator’s propellers cannot reach and stir. In order to resolve this issue, install the mud gun in the top of the tank to agitate the far corner of the mud tank.

Mud Gun

GN Solids America LLC’s GNNJQ series Mud gun serve as supportive machinery to the mud agitator.  It comes with nozzle that either made fixed angle or 360 degree ration angles the positive spray-effect distance of mug gun is approx. 3 meters long.   The gun size is related with drilling fluid density, viscosity and nozzle spray speed.  Mud gun is installed the top of mud tank can be need adjusted as need at any time. A mud gun is connected to a motor-pump to stir the drilling mud and prevent the solids from sinking on the bottom of the mud tank. The mud is mixed by being suck- withdraw into a pipe by a powerful pump and inject  back into the mud tank by being pressured push through the nozzle of the mud gun. The process is similar to how jets spray in the dish washer.

 

Drilling mud is a wet mud like substance resembles like thick clay and is used to keep the drill head in controlled-temperature and carry the remnants of drilling cutting to the surface in water and oil or gas drilling operations. The mud is recycled and reused by passing it through several steps of filter and cleaning by screens of the shale shaker or mud cleaner and decanter centrifuge as it is circulated into the mud tanks then back to the drill well on the drilling rig. In order to keep the mud as liquid-liked as possible, a mud gun and mud agitator is used to keep the tank agitated and mixed.  Drilling mud is made by mixing water or oil with a clay-like substance and also other chemicals.

 

Vacuum Degasser
is mostly used in essential oil & gas drilling rigs. It is used to remove
the fuel in the drilling mud to hold the property, keep the density, the law of
gravity and viscosity of the drilling mud. This unit is generally installed
after shakers, can function efficiently to remove gas through gas-cut mud, to
prevent possible blowouts. This unit is essential working as one of security
equipment in drilling rigsite.
Recently, we have one customer from Africa, purchasing 1 set vacuum degasser
for first time project. The client is nearby famous drilling contractor as well
as work together with Shell, Mobil, Chevron, Halliburton etc .
The actual vacuum degasser we offer for them, with below technical specs:

· Model: GNZCQ360A
· Main size: 920mm
· Capacity: ≤360 m3/h (1584GPM)
· Vacuum Degre: -0. 02~-0. 04 Mpa
· Handling Efficiency: ≥95%
· Main Electric motor Power: 37Kw (50HP)
· Pump Motor Power: 7. 5Kw (10 HP)
· Rotation Pace: 860RPM
· EX Standard: ExdIIBt4
· Suction line size: six inch
· Outlet line dimension: 8 inch
· Weight: 1870kg
· Dimension: 2100×1605×1729mm

The produce is as per GB/T11645-89 Nationwide Standard. After all assembly
complete, test with water. Almost all connections and welding factors no
leakage, vacuum level reach to above 400mmHg. Within 2hours, bearing temporary.
Keep below 60°C. Absolutely no abnormal noise or coup.
Except for vacuum degasser, all of us export large quantity of decanter
centrifuge
, vertical cuttings dryer, mud agitator, centrifugal penis pumps,
shale shakers and shaker screens.
1) GN high quality decanter centrifuge for Africa marketplace
GNLW363CG or GNLW363CG-VFD is among the most popular decanter centrifuge with
regard to solids control drilling marketplace. The 14inch decanter centrifuge
can be used for barite recuperation, mud weight cutting as well as LGS
separation. This is the the majority of flexible centrifuge model, that similar
to US brand centrifuges.

2) GN premium up and down cuttings dryer for Africa drilling
waste management
project
GNCD930 vertical cuttings dryer is actually tested in rigsite for nearly 3
years. In the past years, all of us keep improving the quality as well as
design of the dryer. For the time being, the quality and performance can
contend with US brand vertical cuttings dryer. Many drilling service provider
shift from US brand name dryer to GN
Solids Control
brand, to get higher cost-effective product.
3) Great quantity of centrifugal pumps and shaker screens also exported in
order to Nigeria, Egypt, Libya, Sudan, Gabon, Ghana etc .

-web۴���

image

GN Solids Control
provided one set of mud system for The european union GN
Solids Command manufactures various mud these recycling systems and most of
these mud systems are widely used within over 60 countries. As increasing
numbers of countries pay attention to the environment safety, GN mud
recycling system
 are getting more and more popular.

Lately, GN Solids Control only provided one set of mud system that using in h2o
well drilling for The european union. GN Solids Control mud systems
successfully won this kind of project due to the large productive projects that
we did ahead of. And GN Solids control also has many certifications that prove
GN has been attempting to be the No . 1 solids control manufacturer in the
world. Vouchers such as API, DNV, ISO are available since the establishment.

This kind of GN water well mud system is purchased by on the list of leading
well drilling firms in Europe. They will recycling the drilling mud and
recycling the water. This system is like the bellowing equipments:

image

1 .GN
Double Deck Shaker

Which has a compact structure, GN dual deck shaker is mainly useful for two
phase separation. The top shaker is equipped with shaker displays have larger
opening, whilst the bottom shaker is equipped with displays have small opening.
Going fluids will be separated with the upper deck shaker beforehand, then it
can be further split up by the bottom shaker.

2 . GN Decanter
Centrifuge

GN centrifuge GNLW363 is traditionally used to separate out pretty good solids
from 2 microns to 5 microns. The spinning bowl diameter is 14inch, with a high
rotating increase to 3200 rpm, often the G force can get to to 2062G.

3. GN Screw Pump

GN good displacement pumps, also referred to as screw pumps, they are mainly
utilized to feed into decanter centrifuge without agitating the drilling mud
too much.

4. GN mudTank

Shaker, centrifuge along with screw pump are attached with one mud tank. On
this company design, GN drinking water well mud system can be utilized in many
different worksites.

Related Posts