mud agitator |

GN power flare ignitor

BY GN Nodig 15 July 2016 decanter centrifuge, mud agitator, mud mixing system, shale shaker, shear pump, solids control, Uncategorized

GN solids control Design and manufacture of container of combustible gas oilfield operations in the electronic déflagration system is the refinery along with gas gathering and switching exhaust and vent typically the gas processing plant, having fields of electronic combustion system can vent inflammable harmful gas ignited lose in order to eliminate its difficulties for environment and safety, is often a safe, environmental protection products. Besides used in refinery and also gas stations, oil field electric ignition device with mud gas separator, is now traditionally used in oil drilling executive.
Oil field the superiority regarding electronic ignition system
Digital ignition oil fields “artificial lighting” to “automatic operation”, reflect the humanistic thoughts and environmental demands. Making it necessary to use electronic combustion device, drilling, testing, development process, the release is often the truth. Over the past few decades, Flare feu are manual operation, persons close to flare points, can burn, burns easily, high risk; As well, the artificial operation timeframe is longer, the accuracy and reliability is not high, easy to produce toxic gas emissions for the atmosphere in great volumes, cause different degree of atmosphere pollution.
GN SOLIDS CONTROL Production of electronic feu device let the “shortcomings” stopped to exist. It can be currently of relief, timely, exact location setting off export spewed toxic flammable gas movement line, eliminating the damage connected with gas pollution to the atmosphere and human and pet.

GN power flare ignitor
Electronic ignition device besides used in refinery and filling stations, the device with mud propane separator, is now widely used inside petroleum drilling engineering, is actually a mature product, in home and sichuan oil and gas discipline in xinjiang, in spots like Iran, Egypt, venezuela abroad are using the product.
Electric ignition device is mainly made from DN200 (or 6) gasoline burner (torch), GDH : type 2 electronic igniter, firing equipment (gas tank, hose, etc . ), mud gas separator (matching) whenever used in drilling engineering, and so on This product adopts high performance electronic digital ignition circuit, its principal parts adopt imported ingredients and other parts and cables and wires with domestic high quality goods, stable performance, reliable perform.
Procedures:
Install the butano gas pipeline to safe practices of burner (torch) atmosphere inlet.
Pick up and start the actual electronic igniter current transformation and voltage amplification routine.
Open the gas tank, operating electronic igniter light source flash tube ignition (level), or directly open the particular emptying the firing on the gas valve, lit fireplace with electronic igniter pipe ignition (level 1).
Wide open the gas vent gateway cut, lit by the using up fire tube will mélodie (secondary ignition).
Close the actual gas tank, put out open fire tube, let the combustible in-take gas combustion.

GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

Types of Mud Agitator gear box

BY GN Nodig 8 July 2016 decanter centrifuge, mud agitator, mud mixing system, shale shaker, shear pump, solids control

Mud agitator is widely used in mud cleaning systems. It is utilized in the mud tank as well as on the vessel to avoid the actual particles from settling straight down. Mud agitator is composed of some sort of motor, a gearbox, the particular shaft and impellers. This can be a very small equipment for drilling field.
Normally, a drilling rig mud tank system should be equipment with a significant no . of agitators. The higher quality , of the tank sides, a lot more quality of the mud agitators.
Many clients do not how to choose the best mud agitators modes and know the different mud agitators from different brand and various design. The main difference is that, typically the gearbox type is different. You will find mainly 2 type of items motor for mud agitators: helical bevel type items motor and Worm and kit type.
The helical bevel type gear motoriswith 2-stage or 3-stage transmission period.
It is with foot-mounted, flange-mounted Mounting mode, short flange-mounted model, torque arm-mounted type.

Furthermore, the Output shaft ofthe helical bevel type accessory motoris solid shaft, ineffective shaft (with key, having shrink disc and with involute spline).
Features of Helical-Bevel Products box and motor regarding mud agitator
It is Large modular design of the helical bevel type gear electric motor.
The helical bevel variety gear motoris with High reloading support. It is with a secure transmitting and a low noise degree.
The helical bevel variety gear motor is with good performance sealing. It can be used for an array of industry application.
The helical bevel type gear generator is with a High efficiency. It will save power during operating.
The helical bevel style gear motoris low repair and it can reduce the cost of users.
Worm and gearmotor device agitators is one of the most popular kind mud agitator. The gear package is worm and gear kind for easy operation repairs and maintanance. The worm and gear package is utilize the gear in order to transmit the motor acceleration to the request RPM. It might be widely used.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

GN keeps research and develop the best technology to manufacture top quality shaker screens for our clients,

Welcome come to know more info from our sales team.

Mud Gun-Supportive Solids control equipment for drilling mud

BY GN Nodig 5 July 2016 decanter centrifuge, mud agitator, mud mixing system, shale shaker, solids control

Drilling mud service contractors around the world are all use the rectangular drilling fluid circulating tank because the installation and migration performance of the system works very well. Meanwhile, no matter how good the mud agitator perform in ideal situation, the drilling fluid tank all have corners that mud agitator’s propellers cannot reach and stir. In order to resolve this issue, install the mud gun in the top of the tank to agitate the far corner of the mud tank.

Mud Gun

GN Solids America LLC’s GNNJQ series Mud gun serve as supportive machinery to the mud agitator. It comes with nozzle that either made fixed angle or 360 degree ration angles the positive spray-effect distance of mug gun is approx. 3 meters long. The gun size is related with drilling fluid density, viscosity and nozzle spray speed. Mud gun is installed the top of mud tank can be need adjusted as need at any time. A mud gun is connected to a motor-pump to stir the drilling mud and prevent the solids from sinking on the bottom of the mud tank. The mud is mixed by being suck- withdraw into a pipe by a powerful pump and inject back into the mud tank by being pressured push through the nozzle of the mud gun. The process is similar to how jets spray in the dish washer.

Drilling mud is a wet mud like substance resembles like thick clay and is used to keep the drill head in controlled-temperature and carry the remnants of drilling cutting to the surface in water and oil or gas drilling operations. The mud is recycled and reused by passing it through several steps of filter and cleaning by screens of the shale shaker or mud cleaner and decanter centrifuge as it is circulated into the mud tanks then back to the drill well on the drilling rig. In order to keep the mud as liquid-liked as possible, a mud gun and mud agitator is used to keep the tank agitated and mixed. Drilling mud is made by mixing water or oil with a clay-like substance and also other chemicals.

Five filtration machinery that filter the drilling mud completely

BY GN Nodig 7 June 2016 decanter centrifuge, mud mixing system, shale shaker, solids control

Drilling mud serve as lubricant that keep the drilling bit operate smooth. The consequence of drill bit overworked by temperature heading up will lead to hard work of engine and transmission that lead to breakdown and halt the whole operation. It is a very costly operation halt that leads cost of extra ten thousand of dollars and more. Plus, the drilling fluid is also a very costly lubricant and to keep the drilling cost under control, solids control machinery is need for filter the debris that contain in the drilling mud for many times of cycle of use the drilling mud. The 5 filtration machineries that will completely perform filter the solids from the drilling mud are shale shaker, vacuum degasser, Mud Gas Separator, desander, desilter and decanter centrifuge.

160531-Decanting-Centrifuge

The filter step goes in below:

Shale shaker

The drilling mud feed enter the feeding box of shale shaker. The mud contains various size of the solids return to the ground surface and shale shaker is filtering the biggest solid by use high G force of shaking. The box of shale shaker contain panels of mesh screen that is different number of mesh depend on solids contents analyze by drilling mud engineer

Vacuum degasser

. The muds that return to ground surface not only contain solids but also gas from the earth core. This gas that change density of drilling mud leads result change the viscosity of drilling mud. Vacuum degasser removes the gas in the drilling mud to keep the mud in balance and continue the future solids filter process.

Desander

The drilling fluids now that contain medium size solids enter the liquid feeding pump and enter the desander, which contain large hydrocyclone(s). The solids diameter above 40-60um will be filtered and bottom of desander is pair with shale shaker contain finer mesh compare with first shale shaker to complete the filtering. T

Desilter

This machinery’s function of work is just as same like desander in last step before. It contains multiple smaller hydrocyclones that can remove solids that measure diameter above 15-40um. It is also pair with shale shaker like desander and completes this step of filtering.

Decanter Centrifuge

The drilling fluid feed through centrifugal pump that feed into decanter centrifuge that rotate in High speed of G force. The rotating bowl will separate solids from the mud and exit in one for solids and other one is for filtered mud. The drilling mud now will feed back to the rig for next cycle of usage.

Several solids control equipment released to overseas clients

BY GN Nodig 6 June 2016 decanter centrifuge, mud agitator, shale shaker, solids control

GN Solids Control is The far east leading brand of solids control equipment supplier with basic in Beijing, Houston and also Russia. And each month all of us export lots of mud devices for solids control as well as drilling waste management or even mud system to in a different country client and domestic consumers. Recently our company is fully entertained because of lots of project tools are ready for dispatch.

1) Several centrifugal pump for Nigeria client
Nigeria have a lot of oil drilling rigs in addition to oil blocks. Oil sources is rich there and have lots of clients coming from Nigeria who bought decanter centrifuge, drilling waste management straight cuttings dryer, solids control shale shaker, replacement shaker screen etc . from each of our company—GN Solids Control. Just lately, we got some small get from Nigeria who wants to change their old centrifugal sends. And we sell some models of good pump and mud agitator to them.

2) several sets of mud agitator for Egypt clients
The consumer bought this agitator is actually GN old client who have already bought 2 models 500gpm mud cleaning system for their HDD drilling. These are really happy about the mud system high quality and the dependable working performance. The 500gpm mud system is equipped with some panel shale shaker in addition to 4 panel mud cleaner. The shaker screen is actually composite material shaker screen, replacement for Swaco Mongoose shaker screen, with much better performing performance, longer lifetime and fewer maintenance. We also have additional treating capacity mud system for option. Like 200gpm mud system, 800gpm mud system and 1000gpm mud system

3) 2 models shale shaker for UAE client
Good maintenance can help you lots of cost, than shopping for new products. We give train to be able to client and let them to utilize GN equipment to greatest. And recently, we have 1 client wanting to replace the previous shakers for about 3 years. Which is really good. The shale shaker is to update the mud system the client already have over 2 years. The client buy two sets new shale shaker to update their older mud cleaning system and this is usually relative lower cost to continuing the new project. Because of the lower market, many clients want to take budget, save cost is to do more project. We highly recommend client to renew the mud system with new tools, new shaker, new centrifugal pump, new mud cleaner and new agitator. Commonly, the mud tanks last longer time if the regular maintenance is doing each time soon after use.