drilling waste management

Recently GN solids control shipped some customized
designed drilling cuttings solidification unit to South africa, this is not our
first product solidification unit, pls what is previous shipment news after
principle components of stabilization unit is usually including: drilling waste
variety hopper, cement storage container, Absorber storage box, shear mixer,
liquid feeding, mixer discharge, and skid, you can make customized treating
ability solidification unit for
your unique requirement. Our standard type GNGH-10A stabilization unit together
with 10m3/h treating capacity, the system for the Africa client is definitely
GNGH-15A with 15m3/h managing capacity.
The main parameters regarding GNGH-15A solidification unit:
(1) shear
mixer power: 45kw
drilling waste storage volume: 5m3
(3) screw
conveyor power: seven. 5kw
cement storage level: 1000L
cement screw conveyor power: 1 . 1kw
absorber storage volume: 1000L
absorber screw conveyor powder: 1 ) 1kw
required crane features: 0. 5tons
(9) total
electric power consumption: 54. 7 kw
(10) All
the screw conveyor is with VFD control, typically the flow rate is variable
(11) The
mixer tank amount: 4000L

To get more info connected with GN drilling cuttings renforcement unit specs,
pls speak to GN solids
product sales.
Why choose GN renforcement unit?
(1) Applicable for equally oil based drilling cuttings as well as water based
drilling cuttings
(2) It produced a enviroment safe and dry materials which is acceptable for
landfill or land farming grasp.
(3) It produced a relatively dried out material with steadily construction
which is cheaper for transfer or disposal, it is an economical way for drilling
cuttings grasp if it is laws allowed in this country.
(4) Except for securing unit, GN also provide drilling
waste management system
with regard to both water based mud and oil based
mud, we could actually provide the turnkey solution to get drilling waste

GN solids America
located in 6710 winderfern road, Houston, TX77040, here you
are at visit our warehouse inside Houston and consult with our own sales team.

Among all the Chinese Solids Control
suppliers, even commented by its peers in this industry, GN Solids Control has
a good reputation, because since its establishment several years ago, GN has
been determined to provide the oil and gas industry the best quality equipments
and most efficient solutions and to stand an good example for Made in China.

Now, GN Solids Control became the second
to none solids control company and the main reasons are as below:

1. GN always catches up with the newest
technology and GN R&D team always innoviate new designs per end users’
suggestions and apply the designs onto equipment quickly.

2. GN uses the top and reliable material
and parts, like the steel, GN uses the national standard steels from big steel
companies. The bearings and oil sealing, GN use SKF,
NSK, FAG and SOG. Only good material can ensure the good products.

3. GN is serious about after-sale service, like
the free of charge first time commissioning for main equipments, and for after
sale services, like spare parts, GN always has spare parts available in stock
and can do on line diagnose in case of troubles.

When talking about the real performance of
the equipment, the evidences from the clients who use them are more convincible
than those from the manufacturer. There are feedbacks from some of GN clients:

1. Baker Hughes, one of the largest Oil
Service companies in the world, choose GN as its solids control supplier in
China, and ordered 4 sets of complete GN drilling
cuttings waste management systems
to use in their Russian sites. And they
are giving good feedbacks and comments. You can see their jobsite working video

2. An Nigerian drilling company, they
visited all China main solids control suppliers before ordering, and finally
chose GN for long term cooperation and use GN’s centrifuges, vertical
cuttings dryers
and pumps and etc. They are foreign companies in Nigeria,
they have to strictly obey all the regulations for protecting the environment,
and GN’s equipment and solutions helped them a lot.

3. other clients, like Scomi Oiltools, also
an international company for oil service, and some European companies, and etc.
Same equipments system is also working on Shell’s jobsite, see jobsite video

Related Posts

Because first API certified solids
control manufacturer in Cina, GN Solids Control has furnished to more than 60
international locations and regions with its affordable products, covering all
connected main equipment of solid control and waste management system for oil and gas going.

The main principle of the solid control systems is actual physical separation,
using the physical personas of different media, the solid waste control
equipment separate the maximum amount of solids from the liquid. At this time,
in other industries apart from the oil and gas drilling, such efficient
equipments are also chosen in the end users, to make their function more
efficient and easier.
Actual physical Functions of solids management equipment:
Since the most important solid waste control equipments are correspondingly
shale shaker and decanter centrifuge, many of us talk about only these installment payments on your Now
in many oil and gas going jobsite, the end users decide on more shakers and
centrifuges instead of former hydrocyclones.

– shale shaker. Shale shaker is among the most efficient equipment in solid
waste control process, because it utilizes less energy while isolates the most
solids out of the water by using the different size of the particular solids
and by means of diverse size mesh on the shaker and a couple of vibration power
generators. The disadvantage is that the shaker weren’t able to separate very
fine allergens, and its separation work is draft. GN has several nos screen
shale shaker as well as 4 nos screen shale shaker for option
with unit GNZS703E and GNZS594E

installment payments on your decanter centrifuge is a high speed sequence
machine, mostly horizontal. Within the high speed rotating bowl in addition to
inside bowl there is an impeller. During the rotating, the centrifugal forces
on different stuff are not same, that causes typically the liquid phase
continuously passes out of the bowl while the shades particles are slashed for
the bowl inside wall in addition to pushed out of the centrifuge debris
discharge ports. The decanter centrifuge a gentle and precise, higher priced
than shale shaker, not only the expense of itself, but also the consumption of
energy. But it is ideal solution with regard to separating out the fine and
additional fine particles. GN centrifuge family covers all popular sizes of
decanter centrifuges from 9 inch pan diameter to 22 inches bowl diameter, among
those centrifuges, GNLW363 with 14 inches bowl is the most popular type.

For more information, welcome to contact us unhampered or visit our website.

Related Posts

Hebei GN Solids Control Co., Ltd is the top
manufacturer of solids control equipment and leading manufacturer of drilling
waste management equipment in China, being the first API certified in China and
the first developed vertical
cutting dryer
in China. Because of its leading role in solids control and
waste management technology, Hebei GN Solids Control Co., Ltd has exported to
over 60 countries and occupied the largest portion in the international market,
thus achieving a famous brand GN Solids Control.
Certainly, Africa especially Nigeria is a huge market for GN, and now around
100 sets decanter centrifuge are operating in Africa for solids control.
Recently, our sales team are now in Nigeria doing commission service for 3 sets
waste management equipment
on the drilling site.

GN main product line of drilling waste
management includes high G shaker, vertical cutting dryer and decanter
centrifuge. GN high G
can reach to max 8.0 G force because the screen bed is made of
stainless steel and the whole deck is heat treated. GN vertical cutting dryer
can reach to a 750 G force at a speed of 1200RPM so as to dry the oil based
drilling cutting with a oil content at around 5%. GN decanter
is to treat the liquids discharge from high G shaker or the
vertical cutting dryer to make more clean fluids return back to active system. Beside
singe drilling waste management equipment, GN Solids Control also supplies
complete drilling waste management system with the combination of vertical
cutting dryer and decanter centrifuge on a skid mounted with little mud tank. GN provides 2
standard model of drilling waste management system for customers’ option, and
also customized drilling waste management systems are available in GN.

Many people get problems after found drilling cuttings from shale shaker is not dryer enough and they need dry them to delivery as per law. What you can do to dry oil base mud drilling cuttings?

GN Designed and build drilling waste management system for oil base mud cuttings and can supply a complete line of it to offer a solution for you.

Main Points Of GN Drilling Waste Management System

  1. Buyyer need supply (Or buy from us) 2 augers to feed vertical cuttings dryer by drilling cuttings out of shaker from solids control system
  2. Vertical cuttings dryer will process cuttings and dryer cuttings with oil no more than 5%
  3. Dry cuttings will be collected by another auger and delivery to cuttings storage
  4. Fluids from vertical cuttings dryer will drop to a small holding tank
  5. A screw pump will collect oil from holding tank to feeding decanter centrifuge for recycling
  6. Solids from decanter centrifuge will be collected by an auger and to a cuttings box
  7. Clean fluids after centrifuge will be guide into solids control mud tank for re-use
  8. Auto control of screw pump will help a lot cause it’s not working continously, this will help save labour and mistake
  9. High speed centrifuge is requried to separate solids 2-5 micron with 3200RPM speed
  10. Holding tank size no need to be very big cause fluids after vertical cuttings dryer not so much

GN Solids build waste base drilling cuttings dryer system also, please contact GN freely