decanter centrifuge

GN solids control Design and manufacture of container of combustible gas oilfield operations in the electronic déflagration system is the refinery along with gas gathering and switching exhaust and vent typically the gas processing plant, having fields of electronic combustion system can vent inflammable harmful gas ignited lose in order to eliminate its difficulties for environment and safety, is often a safe, environmental protection products. Besides used in refinery and also gas stations, oil field electric ignition device with mud gas separator, is now traditionally used in oil drilling executive.
Oil field the superiority regarding electronic ignition system
Digital ignition oil fields “artificial lighting” to “automatic operation”, reflect the humanistic thoughts and environmental demands. Making it necessary to use electronic combustion device, drilling, testing, development process, the release is often the truth. Over the past few decades, Flare feu are manual operation, persons close to flare points, can burn, burns easily, high risk; As well, the artificial operation timeframe is longer, the accuracy and reliability is not high, easy to produce toxic gas emissions for the atmosphere in great volumes, cause different degree of atmosphere pollution.
GN SOLIDS CONTROL Production of electronic feu device let the “shortcomings” stopped to exist. It can be currently of relief, timely, exact location setting off export spewed toxic flammable gas movement line, eliminating the damage connected with gas pollution to the atmosphere and human and pet.

GN power flare ignitor
Electronic ignition device besides used in refinery and filling stations, the device with mud propane separator, is now widely used inside petroleum drilling engineering, is actually a mature product, in home and sichuan oil and gas discipline in xinjiang, in spots like Iran, Egypt, venezuela abroad are using the product.
Electric ignition device is mainly made from DN200 (or 6) gasoline burner (torch), GDH : type 2 electronic igniter, firing equipment (gas tank, hose, etc . ), mud gas separator (matching) whenever used in drilling engineering, and so on This product adopts high performance electronic digital ignition circuit, its principal parts adopt imported ingredients and other parts and cables and wires with domestic high quality goods, stable performance, reliable perform.
Procedures:
Install the butano gas pipeline to safe practices of burner (torch) atmosphere inlet.
Pick up and start the actual electronic igniter current transformation and voltage amplification routine.
Open the gas tank, operating electronic igniter light source flash tube ignition (level), or directly open the particular emptying the firing on the gas valve, lit fireplace with electronic igniter pipe ignition (level 1).
Wide open the gas vent gateway cut, lit by the using up fire tube will mélodie (secondary ignition).
Close the actual gas tank, put out open fire tube, let the combustible in-take gas combustion.

GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

 

Mud agitator is widely used in mud cleaning systems. It is utilized in the mud tank as well as on the vessel to avoid the actual particles from settling straight down. Mud agitator is composed of some sort of motor, a gearbox, the particular shaft and impellers. This can be a very small equipment for drilling field.
Normally, a drilling rig mud tank system should be equipment with a significant no . of agitators. The higher quality , of the tank sides, a lot more quality of the mud agitators.
Many clients do not how to choose the best mud agitators modes and know the different mud agitators from different brand and various design. The main difference is that, typically the gearbox type is different. You will find mainly 2 type of items motor for mud agitators: helical bevel type items motor and Worm and kit type.
The helical bevel type gear motoriswith 2-stage or 3-stage transmission period.
It is with foot-mounted, flange-mounted Mounting mode, short flange-mounted model, torque arm-mounted type.

Mud Agitator
Furthermore, the Output shaft ofthe helical bevel type accessory motoris solid shaft, ineffective shaft (with key, having shrink disc and with involute spline).
Features of Helical-Bevel Products box and motor regarding mud agitator
It is Large modular design of the helical bevel type gear electric motor.
The helical bevel variety gear motoris with High reloading support. It is with a secure transmitting and a low noise degree.
The helical bevel variety gear motor is with good performance sealing. It can be used for an array of industry application.
The helical bevel type gear generator is with a High efficiency. It will save power during operating.
The helical bevel style gear motoris low repair and it can reduce the cost of users.
Worm and gearmotor device agitators is one of the most popular kind mud agitator. The gear package is worm and gear kind for easy operation repairs and maintanance. The worm and gear package is utilize the gear in order to transmit the motor acceleration to the request RPM. It might be widely used.
GN Solids Control sell a series of solids control equipment and drilling waste management equipment including vertical cuttings dryer , shale shaker  , shear pump , oilfield shale shaker , mud cleaner , desander and desilter , vacuum degasser , Mud Gas Separator , decanter centrifuge , mud tank , mud agitator , etc . GN Solids Americal normally keep stock for GN main product and shale shaker , mud cleaner and decanter centrifuge always keep stock there to service local client .

GN keeps research and develop the best technology to manufacture top quality shaker screens for our clients,

Welcome come to know more info from our sales team.

Drilling mud service contractors around the world are all use the rectangular drilling fluid circulating tank because the installation and migration performance of the system works very well. Meanwhile, no matter how good the mud agitator perform in ideal situation, the drilling fluid tank all have corners that mud agitator’s propellers cannot reach and stir. In order to resolve this issue, install the mud gun in the top of the tank to agitate the far corner of the mud tank.

Mud Gun

GN Solids America LLC’s GNNJQ series Mud gun serve as supportive machinery to the mud agitator.  It comes with nozzle that either made fixed angle or 360 degree ration angles the positive spray-effect distance of mug gun is approx. 3 meters long.   The gun size is related with drilling fluid density, viscosity and nozzle spray speed.  Mud gun is installed the top of mud tank can be need adjusted as need at any time. A mud gun is connected to a motor-pump to stir the drilling mud and prevent the solids from sinking on the bottom of the mud tank. The mud is mixed by being suck- withdraw into a pipe by a powerful pump and inject  back into the mud tank by being pressured push through the nozzle of the mud gun. The process is similar to how jets spray in the dish washer.

 

Drilling mud is a wet mud like substance resembles like thick clay and is used to keep the drill head in controlled-temperature and carry the remnants of drilling cutting to the surface in water and oil or gas drilling operations. The mud is recycled and reused by passing it through several steps of filter and cleaning by screens of the shale shaker or mud cleaner and decanter centrifuge as it is circulated into the mud tanks then back to the drill well on the drilling rig. In order to keep the mud as liquid-liked as possible, a mud gun and mud agitator is used to keep the tank agitated and mixed.  Drilling mud is made by mixing water or oil with a clay-like substance and also other chemicals.

 

April is a beautiful efforts Russia, especially in their investment city Moscow. The annually event for oil and gas market, including all related job areas including oil and gas drilling, olive oil refinery, drilling mud these recycling chemicals and equipments, also transportation equipments and options.
As the leading manufacturer to get solids control and drilling waste management, GN Solids Control established office inside Moscow for 2 years, and it has been attending the Moscow Oil Show for many years. On a yearly basis, GN brought the newest type of equipments to the Russian customers and feedbacks are good.

Russia Oil Show
This current year, for MIOGE Oil Indicate, GN will bring following tools:
1 . GNCD930D vertical cuttings dryer. GN firstly created the GNCD930 decanter centrifuge several years ago, now it is the fourth generation with the flushing atmosphere gun and other new improvements, it is used by many big companies worldwide, including Baker Hudges, along with etc .
2 . GNLW363CG decanter centrifuge, it has many purposes, like drilling waste management together with vertical cuttings dryer, for solids control, it could be used for barite healing period, or extra fine contaminants separation, or together with dewatering unit as dewatering centrifuge with chemical enhanced dust.
3. Mud Cleaner GNZJ594E-3S16N, it is a combination of shale shaker, desander cones and desilter cones, always positioned right after shale shaker. You can check the idea with all advantages of GN shale shaker, GN desander cones and desilter cones.

GN has complete solids control and waste management series for oil and gas drilling, any turn key solution, with necessary equipments. If you need details, welcome to visit us at the necessary oil show, we have Russian talked sales to support you. Apart from, there are CIPPE in Next month in Beijing, Iran Olive oil Show in May with Tehran, and OTC with May in Houston that you see us.

GN Information for MIOGE:
Booth: Pavilion-2, Hall-5, C 40
Moment: April 18-21, 2016
Spot: EXPOCENTER, Moscow, Russia

Mud tanks are used very often on drilling site to store the drilling fluids and to be used as the base to locate the drilling fluids recycling equipment like shale shaker and decanter centrifuge. GN solids control is a manufacturer specially for drilling fluids recycling equipment, thus the mud tank is one of GN’s main products.

So long you want to reserve the drilling fluids on site, and then you will need mud tanks. The size and structure of the mud tanks would be various according to the drilling depth and drilling type. Some drillers have their own mud mixing system with the rig, thus they can do the mud recycling job onsite, which is very convenient and cost saving. Some other drillers will collect the used drilling fluids and send to a mud plant for separation, after large size cuttings removed, the drilling fluids will be brought back to the rig for reuse. Trailer mounted tank is an ideal choice for these drillers as the drilling fluids could be collected in the tank and very fast to deliver to the mud plant. GN is not good at making such type mud tanks.

While most of GN’s mud tank are skid mounted that could be lifted and dragged on site by crane or truck. This type mud tank is better to be put on site permanently with the rig, whenever the rig would be moved; the mud tanks would be moved.

drilling mud system

For some drilling site with limited space and the driller have the requirements for move the mud tank from one site to another frequently, GN proposed the mud tanks with hydraulic jack-up leg system. At both ends of the mud tank, the jack-up legs are installed to rise the whole tanks and even the equipment on the tank. The legs can open that the flat bed trailer can back in, and then the legs will fall down until the tank be put on the trailer smoothly. At this time, the mud tanks could be transported to other sites.

GN has made mud tank with jack-up legs for many customers coming from oil gas drilling and no dig drilling industry. This is also a very good option for fast moving mud tank design.